ADSP-BF548 EZ-KIT Lite® Evaluation Kit
Simplifies Hardware and Software Development Start-Up
The ADSP-BF548 EZ-KIT Lite® provides
developers with a cost-effective method for initial evaluation of the ADSP-BF54x Blackfin® Processors via an USB-based
tool set.
With this evaluation kit, users can learn
more about the ADSP-BF548 hardware and software development, and quickly prototype a wide range of applications.
Desktop Board and Evaluation Suite of VisualDSP++®
The ADSP-BF548 EZ-KIT Lite® includes a fully featured desktop evaluation board along with an evaluation suite of the Visual-DSP++® development and debugging environment, including the C/C++ compiler, assembler and linker. The evaluation suite of VisualDSP++ is designed to be used with the EZ-KIT Lite® only.
Product Features
| > |
ADSP-BF548 Processor: 400 Ball mBGA, 600 MHz, 25 MHz CLKIN oscillator
|
| > |
DDR SDRAM: 64MB (8M x 16), Micron MT46V32M16
|
| > |
Burst Flash: 32MB (16M x 16), Intel® C28F128K3C115
|
| > |
NAND Flash: 2Gb, ST Micro NAND02
|
| > |
SPI Flash: 16Mbit, ST M25P16
|
| > |
2.5”/40GB hard drive: Toshiba MK4032GAX
|
| > |
AC’97 CODEC: AD1980 5.1 Surround CODEC
|
| > |
LCD Display with touch screen 4.3”, 480 x 272, Sharp LQ043T1DG01
|
| > |
AD7877 touch screen controller
|
| > |
Ethernet: SMSC MAC/PHY, LAN9218
|
| > |
4x4 keypad: ACT Components ACT-07-30008-000-R 4x4
|
| > |
Thumbwheel: CTS Corp 290UAB0R201B2
|
| > |
UART: ADM3202 (RS-232 line driver/receiver), DB9 female connector
|
| > |
USB debug agent and JTAG header
|
| > |
Connectors: High-speed USB OTG, SD Memory, CAN (2), Host, expansion interface (3), STAMP interface (7)
|
| > |
LEDs: 1x power (green), 1x board reset (red), 1x USB (red), 6x general purpose (amber)
and 1x USB monitor (amber)
|
| > |
Push buttons: 5 push buttons with debounce logic, 1x reset, 4x flag (programmable) |
Additional Information
For more details regarding the ADSP-BF548
EZ-KIT Lite®, simply contact your SPOERLE representative or visit
www.analog.com
|
