LPC Microcontrollers with ARM7 Core

From Low-Cost to High-Performance Derivatives

With more than 30 different LPC2000 devices, NXP offers more ARM7-based microcontrollers than any other vendor. These microcontrollers are part of a family concept which, because of the shared resemblance, allows designers and manufacturers to benefit from easy migration paths.

The LPC2000 family of microcontrollers offers an excellent price-to-performance ratio and is ideal for use in a wide range of applications. Good examples are the LPC210x, LPC22x0, LPC23xx and LPC24xx derivatives.

LPC210x – Small, low-cost MCUs with integrated A/D Converter
These powerful yet cost-effective microcontrollers have up to 32 KB of Flash (zero wait-state) and up to 8 KB of SRAM. Each device of the series features a 10-bit A/D converter with eight channels and multiple serial interfaces. Available in a package that measures only 7 x 7 mm, the LPC210x MCUs are perfectly suited for use in space-constrained applications.

LPC22x0 – Flashless MCUs Designed for Memory-intensive Applications
The LPC22x0 devices are high-performance, Flashless microcontrollers designed for applications that use large external memories. Operating at clock rates of up to 75 MHz, these MCUs have up to 64 KB of on-chip RAM and feature an external memory interface. There are options for up to two CAN bus interfaces.

LPC23xx – Integrated Ethernet, USB and Can Peripherals
The LPC23xx series 72 MHz microcontrollers support 10/100 Ethernet, full-speed (12 Mbit/s) USB 2.0 and CAN 2.0B. They have up to 512 KB of ISP/IAP Flash, up to 58 KB of SRAM, 10-bit A/D and D/A converters, an internal RC oscillator, and options for an SD memory card interface.

LPC24xx – Ethernet, USB OTG, CAN and optional LCD Controller
Built for connectivity: The LPC24xx series MCUs not only support 10/100 Ethernet, full-speed (12 Mbit/s) USB 2.0, USB OTG and CAN 2.0B, they also provide two ARM high-speed buses (AHB) for simultaneous communications operations. Other features include 512 KB of ISP/ IAP Flash, 98 KB of SRAM, an external memory interface, 10-bit A/D and D/A converters, an internal RC oscillator and an SD memory card interface. The LPC247x adds a QVGA LCD controller.

LPC3180 – 208 MHz Microcontroller with ARM9EJ-S™ Core
In addition to the LPC2000 family of microcontrollers, NXP also offers a high-performance 32-bit microcontroller with ARM9 core. The low-power LPC3180 has a USB OTG interface with full host capability and provides a range of other features, including seven UARTs, two SPI^®, two IēC, a realtime clock with separate power domain, and controllers for NAND Flash and SDRAM, that increase design flexibility.

Additional Information
For detailed specifications please contact your local SPOERLE Branch Office or visit

www.nxp.com

© SPOERLE 2008