Analog Devicesī Power Sample Pack comprises six advanced power management products designed for use in applications such as networking equipment, mobile communications and consumer electronics, data acquisition systems, and medical devices.

The Power Sample Pack includes:

ADP1715
The ADP1715 is a low dropout, CMOS linear regulator that operates from 2.5 to 5.5 V and provides up to 500 mA of output current. Using an advanced proprietary architecture, it provides high power supply rejection and achieves excellent line and load transient response with just a small 2.2 μF ceramic output capacitor.

ADP1829
The ADP1829 is a versatile synchronous PWM buck controller in dual/interleaved configuration that generates two independent output rails from an input voltage of 3.0 to 18 V. Featuring an output voltage range from 0.6 V to 85% of the input voltage, this controller is sized to handle large MOSFETs for point-of-load regulators.

ADP2102
The ADP2102 is a synchronous step-down DC/DC converter that converts a 2.7 to 5.5 V unregulated input voltage to a lower regulated output voltage with up to 95% efficiency and 1% accuracy. The low duty cycle capability of the ADP2102 is ideal for USB applications or 5 V systems that power up submicron subvolt processor cores.

ADP2107
The ADP2107 is a low quiescent current, synchronous step-down DC/DC converter housed in a compact 4 mm by 4 mm LFCSP_VQ package. At medium to high load currents, the converter uses a current-mode, constant-frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response. To ensure the longest battery life in portable applications, the ADP2107 uses a pulse frequency modulation (PFM) control scheme under light load conditions that reduces switching frequency to minimize power consumption.

ADCMP361
The ADCMP361 is a low power, high accuracy comparator with an internal 400 mV reference in a 5-lead SOT-23 package. The internal reference provides the ability to monitor low voltage supplies. The device operates on a supply voltage from 1.7 to 5.5 V and only draws 6.5 μA typical, making it suitable for low power system monitoring and portable applications.

ADM1185
The ADM1185 is a quad voltage monitoring and sequencing device featuring four integrated precision comparators. A 2.7 to 5.5 V power supply is required on the V_CC pin to power the device. All comparators have a 0.6 V reference with a worst-case accuracy of 0.8%. Resistor networks that are external to the V_IN1, V_IN2, V_IN3, and V_IN4 pins set the trip points for the monitored supply rails.

Additional Information
For more details regarding power products from Analog Devices, simply contact your SPOERLE representative or visit www.analog.com

Please send in your request and get a free Analog Devices Power Sample Pack that comprises six advanced power management products.